Rope Cutter
03/25/2021
Fiber Separator
03/25/2021
High(Mid) Density Cleaner
Application
High(Mid) Density Cleaner is mainly applied to remove all kinds of heavy impurities in paper pulp, like steples, stones, glasses,etc.
Salient Features
Large observation window, easy to operate and control.
The separation cone has long cone angle and high slag removal efficiency.
The cone is made of wear-resistant ceramic material with long service life.
The optimized volute type pulp inlet chamber has strong eddy current capacity and obvious low pressure zone partition, which is conducive to the complete separation of pulp and impurities.
Special quick opening slag discharge control valve, sufficient slag discharge and convenient operation.
Technical Data(HCC)
|
Model |
HCC1A |
HCC2A |
HCC3A |
HCC4A |
HCC5A |
HCC6A |
|
Flow Rate(L/min) |
800-1600 |
1500-2800 |
3000-4800 |
4500-5800 |
5800-7500 |
8000-12000 |
|
Concentration of input pulp(%) |
H.C. :2-5 M.C. :1-3 |
|||||
|
Pressure of input pulp(Mpa) |
0.15-0.35 |
|||||
|
Pressure of output pulp(Mpa) |
0.1-0.25 |
|||||
|
Pressure of back wash water(Mpa) |
Pressure of Input pulp+0.02Mpa |
|||||
|
Discharging mode |
Manual/Auto/Intermittence/Continuous |
|||||
Technical Data(HD)
|
Model |
HD2 |
HD3 |
HD4 |
HD5 |
HD6 |
HD7 |
HD8 |
|
Flow Rate（L/min） |
800-1200 |
1200-1800 |
1800-2500 |
2500-3500 |
3500-4500 |
4500-6500 |
6500-8000 |
|
Concentration of input pulp (%) |
2-5 |
||||||
|
Pressure of input pulp (Mpa) |
0.3 |
||||||
|
Discharging mode |
Auto/Intermittence/Continuous |
||||||
